A polycarbonate roll up door is a translucent security shutter whose slats let daylight through while the opening stays locked. It works best for retail storefronts, restaurant fronts, showrooms and interior partitions where visibility matters as much as protection. The sheet thickness, UV coating and guide system determine how it performs, so those are the details to specify before comparing quotes.
Yesoon Door supplies automatic polycarbonate roll up doors from $450 USD FOB Guangzhou. Send the clear opening width and height, slat thickness, color or tint, motor requirement and wind load, and we confirm the specification, documents and delivery terms.
Polycarbonate roll up door slats: what to check
Polycarbonate is a tough plastic sheet with high impact strength. In a roll up door it is formed into hollow or multi-wall slats that slide into the same guide system as steel slats. The material is lighter than steel, does not rust, and lets roughly 50-80 percent of light through depending on the profile. It yellows or scratches over time unless the sheet has a UV coating, so check that before you order.
Where clear roll up doors make sense
Retail storefronts use them so the display stays visible after closing. Restaurants and bars use them to open the front to the street in good weather and close it off later. Warehouses use them for interior partitions where workers need to see through the door before opening it. If the opening faces high traffic or vandals, ask for the thicker sheet and reinforced bottom bar.
What to specify
Send the clear opening width and height, the slat thickness (usually 8-16 mm for commercial use), the color or tint, whether you want a motor, and the wind load for your area. Polycarbonate doors are not as strong as steel against forced entry, so match the sheet thickness to the risk. For coastal areas, confirm the frame and guides are made to resist corrosion even though the slats themselves will not rust.
Polycarbonate vs steel vs PVC
Steel is stronger and cheaper per square meter but blocks light and rusts if the coating is damaged. PVC slats are cheaper and clear but flex more and hold up worse under impact and heat. Polycarbonate sits in between: lighter than steel, clearer than PVC, and better at taking impacts than either when the sheet is thick enough. Pick based on how much light you need and how much abuse the door will take.
FAQ
Can a polycarbonate roll up door be fire rated?
Usually not in the way steel fire shutters are. Polycarbonate is not a fire rated material in most standards, so if the opening needs a fire separation, use a certified steel fire shutter instead.
How long do polycarbonate slats last?
With a UV-stabilized sheet and normal care, expect many years of outdoor service. Uncoated sheet will yellow faster, which is why the UV coating matters.
Can the door be automated?
Yes. Polycarbonate roll up doors work with the same tube motors and controls as steel shutters. Give the supplier the opening size and duty cycle so they can size the motor.
Send your opening dimensions to Yesoon Door, browse our transparent polycarbonate crystal roller door, or read our rolling shutter maintenance guide. Yesoon Door
Request a quote
Tell us the opening size, project location, quantity and any required certification. We will confirm the suitable specification, export documents and factory price.
